NACHI-FUJIKOSHI CORP.

• ADouble helical design with the right hand helical tooth on the end cutting edge and the left hand helical tooth on the shank side suppresses burrs on the top and bottom surfaces of the workpiece.
• The inclines is lower than multipurpose End mills, achieving high machining accuracy.

• Newly developed flute design “Air Flutes” (PAT.P)
• Overwhelmy chip evacuation and cooling performance leads high efficiency milling and long tool life

• Developed the AquaREVO Mills
  as the third of the AquaREVO series
• Suppress chatter vibration
  by adoption of unequally spaced blades and variable leads.
• REVO-M coat with high heat resistance
  and thermal shock resistance demonstrates
  excellent durability in dry and wet processing
• Compatible with a wide range of materials
  from Structural steel to Stainless steel and Hardened steel

• End mill featuring unequal spacing of teeth and variable leads to suppress chattering vibration
  Pre-finish model added to the GSX MILL VL series
• Optimizes cutting-edge design and nick shape for enhanced chipping resistance and high-efficiency machining

• Controls chattering with unequal spacing of teeth and variable leads to achieve high-quality machining
• Improves chip evacuation and stiffness with flute geometry optimized for high-hardness materials
• Features heat-resistant carbide materials and GSX II coating for a longer tool life

• Applications are expanded with VL's longer shank that suppresses chattering.
• High-speed milling is realized for raw materials, titanium alloy, and heat-resistant alloy.
• GSX II coating with superior heat, wear and adhesion resistance to achieve long tool life.
• Additional release of the radius model.

• High-speed milling is realized for raw materials, titanium alloy, and heat-resistant alloy.
• GSX II coating with superior heat, wear and adhesion resistance to achieve long tool life.
• Additional release of the radius model.

• Smooth streamlined ball nose-shaped edge improves chip removal.
• High-speed milling is possible for raw materials, stainless steel, and hardened steels.
• GSX II coating with superior heat, wear and adhesion resistance to achieve long tool life.

• Optimized cutting edge design and nick shape for greater chipping resistance
• GSX coating offers enhanced resistance to wear and heat, ensuring a longer tool life

• Micrograin carbide, which offers high transverse rupture strength and superior thermal shock resistance, ensures greater reliability in wet milling of soft materials
• Enhanced resistance to wear and heat provided by the new GSX coating ensures greater reliability and a longer tool life with a wide range of work materials

• New indexable endmill for high efficiency machining and excellent machined surface quality.
• Wide application range by 3 types of inserts and 5 kinds of inset grades.

• Newly developed ultra aluminum rich Al-Ti-Cr multi-layered "GS Hard Coat" allows super high speed milling up to 800m/min.
• Unique geometry improves chip removal and tool rigidity.
• Improved durability due to new ultrafine particle, cemented carbide.

HSM in wide range
Wide range of High Speed Milling from carbon steel to hardened steel - Thanks for the best combination with Multi-layered TiAlN coating film and tough carbide substrate.

Easy chip control
High speed grooving, and drilling by 4 flutes mill
Thanks for NACHI unique flute geometry.

Ridged and tough
Unique flute geometry and wide land on the cutting edge - Tough cutting edge bring extreme high milling speed and excellent finishing surface.

Series
X's mill Geo L9322
X's mill Geo Radius L9324

For milling of deep groove
It is possible to mill deep groove due to adoption
neck or smaller shank dia.

Rigid and tough
Unique flute geometry and wide land on the cutting edge - Tough cutting edge bring extreme high milling speed and excellent finishing surface.

Long tool life
Wide range of High Speed Milling from carbon steel to hardened steel - Thanks for the best combination with Multi-layered TiAlN coating film and tough carbide substrate.

Drilling - Groove milling
By the adoption of the end teeth which has excellent chip flow and well balanced three flutes, efficiency drilling is possible. A basic form is equal to XAfs mill GEO and high helix angle produce a fine finishing.

Long tool life
A long tool life is realized by the excellent X's coat.

Excellent sharpness around the ball nose edge by new concept Geometry.

Smooth connection between ball nose end cutting edge and peripheral cutting edge.

Compatibility of strength and sharpness
by the optimal chisel shape.

Long tool life by the good combination of high wear-resistant carbide as well as X's coating.

High speed and long tool life
High speed and long tool life is realized, because of using tough tool material & coating for small size end mill.

High stiffness
Precise milling is realized without vibration, because of adoption thick web, unique geometry of flute,and new chisel geometry.

Adoption of 6mm shank
Tolerance of É"6 shank is within 5É m.
Suitable for precise milling due to chucking accuracy is increase.

Series
X's mill GEO Micro Ball LIST9332
X's mill GEO Micro Ball long neck LIST9334

High speed milling
Efficiency beyond the speed 500m/min dry milling.

Sharpness
Sharpness is increase due to adoption high helix angle and adequate cutting face angle.

High efficiency and precise milling
Realize more efficiency and better finishing due to adoption multi flutes.

For hardened steel
It is possible to mill work material of over 60HRC.

Delivery time of mold is reduced
Hard Ball can proceed direct milling of hardened steels.
Shortening delivery time and reduce cost.

Precise milling
Efficiency is increase 30%,and acquire excellent surface roughness.

Series
X's mill HARD Regular LIST9286
X's mill HARD Ball LIST9284
X's mill HARD Long LIST9288

Long tool life
Efficiency processing of stainless steels,Nickel alloys.
Adhesion resistance is increase due to adequate cutting face angle and X's coat.

Precise milling
Acquire the superior roughness of machined surface due to high helix angle and sharpened cutting edge.

High stiffness
It is suitable for efficient processing due to high stiffness which is by thick web.

Long tool life
Realize high accuracy and long life in RIB processing due to unique geometry and X?fs coat.

Precision
Adopting thick web because of acquire precise groove, and adopting sharp cutting edge due to reduce vibration.

Series
X's mill for RIB processing LIST 9496
X's mill Ball for RIB processing LIST 9498
X's mill Taper for RIB processing LIST 9478
X's mill Taper Ball for RIB processing LIST 9494

Wavy shape
Adapted new Wavy inserts' form, high speed milling is coming by its Wavy form, reduced milling force and tough cutting edge.

Long tool life
Combination with Multi-layered X's coating film and fine grade carbide, this is reliable and long tool life cutter in HSM field.

Wide application
For Carbon steel, Alloy steel, cast Iron and Stainless steel, and for any kind of milling operation.

Series
X's mill Wavy XSWEM type LIST9326
XSWMM type LIST9336
X's mill Wavy Ball LIST9328

Multi-function
Enables grooving, shoulder milling, ramping, helical milling, pocket milling and drilling with a single end mill.

Wavy cutting blade
Uses the same chip as that for the XSWEM model. Employs a unique wavy chip for high-speed, high-efficiency cutting.

Wide application
Can be used on a wide range of materials including ordinary steel, alloy steel, stainless steel, and cast iron.

Series
Shank type (2000 and 3000 type)

Wavy cutting edge
Employs unique wavy chip and strong whirl-stop mechanism to provide high-speed, high-efficiency cutting.

Long tool life
X's coating applied to ultra-fine cemented carbide with high chipping resistance for stability and long life.

Wide application
Used for rough or medium finish cutting (contour line process and tridimensional copying) for ordinary steel, alloy steel, die steel and cast iron.

Series
3 types: S, M and L

Dry milling of Aluminum
DLC (diamond-like carbon) is an amorphous material with high hardness and low friction rate, and has similar character of Diamond.
Application for milling in Aluminum Ultra high speed cutting in DRY!

Excellent surface roughness
Dry milling is possible by high rake design, and DLC coating on a lapping rake face.
Surface roughness of wet milling is realized by dry milling.

Applicable end mill
X's Mill Wavy 2000 and 3000 models
X's Mill Wavy Multi-function types 2000 and 3000

Dry milling of Aluminum
DLC (Diamond Like Carbon) is an amorphous material with high hardness and low friction rate,and has similar character of Diamond.
Application for milling in Aluminum Ultra high speed cutting in DRY !

Excellent chip evacuation
Trouble free drilling by unique flute geometry Stable & extra long tool life is realized by DLC film & its unique flute.

Dry milling of Aluminum
DLC(Diamond Like Carbon) is an amorphous material with high hardness and low friction rate,and has similar character of Diamond.
Application for milling in Aluminum Ultra high speed cutting in DRY.

Excellent chip evacuation
Trouble free milling by unique flute geometry Stable & extra long tool life is realized b DL film & its unique flute.

High Accuracy on Corner Radius
The accuracy on Corner Radius is excellent .